|
firelt 04-30-2005, 08:57 AM partsguy662 , can you give me the part numbers for the pitman and idler ,also do they make a heavier duty pitman and idler ,i have been asking around and i am thinking of going this way because i know the fabtech is beefier but i think the reason all pitman and idlers go bad is still there, the way they flex, so i think the moogs with the cognito braces may last longer,thanks mike firelt 04-30-2005, 07:55 PM partsguy662 sent me this ,thanks againOkay, here's what I found out Idler arm (just the arm, not the bracket) Napa # 268-3715 Moog # K6535 Idler arm bracket Napa # 268-3717 No moog number in my interchange Pitman Arm Napa # 268-1679 No moog number in my interchange noreaster 04-30-2005, 08:01 PM did u get the pm i sent u Big Red Max 04-30-2005, 09:53 PM The Fabtechs can be rebuilt. Moog cant I dont believe. EppmanZ06 05-02-2005, 01:48 AM I notice some people are saying they're running moog ball joints in their front ends too. I've been looking for a week now and have no idea where I can get a part number or who sells these ball joints. Any help would be appreciated. Thanks firelt 05-02-2005, 07:35 AM check with partsguy662 he has a napa store he helped me with some part # 02AlliMax 05-02-2005, 11:11 PM Off of Moogs Website- Pitman Arm: K6654 Idler Arm: K6535 (Improved Design W/O Bracket) Inner Tie-Rod end (4WD): ES3488 Inner Tie-Rod end (2WD): ES3489 Outer Tie-Rod end: ES3493T (Improved Design) *****Parts Numbers are for 2001-2002***** Check Moogs website for other years. Hope this gets you started OK Summit Racing carries the parts also. Just add "mog-" before the part number. | ||