|
j-man345 05-08-2009, 07:38 PM I am looking at buyin a set of STS'S for pulling but i am not sure what size to get. The tracks around me (Ontario,Canada) consist of everything from sand to limestone. I am running a built tranny and all the pulling goodies plus efi live with about 550rwhp. I was thinkin 33x13.5x16 or 33x12.5x16. What would be my best choice for my power range. j-man345 05-08-2009, 08:49 PM or do i stick with my 285 75 16 bf all terrians on stockers. Most the tracks around here i think are hard packed. bogger 05-09-2009, 06:24 AM use your bfg at's for your daily drivers and get yourself a set of 33/12.50's and put'em on 10 inch wide wheels. makes for a good wide contact patch bullfrogjohnson 05-09-2009, 11:02 AM The 17" version of the 33x12.50 sts's have a contact patch almost an inch wider than the 16" version of the radials. The 33x.13.50's are a bias ply tire and i havent heard of too much luck out of them. j-man345 05-09-2009, 01:01 PM so a 33x12.5x16 radial would be best CurtisEmery 05-09-2009, 02:40 PM 33x12.5x17 have the widest contact patch. | ||