When my truck was lifted, they forgot to resecure the lighting/pass air bag wiring harness so finally the cooling fan sucked it in and ccrrrrrrruuunch split the entire harness in two. I didn't realize it at first, my "service passanger air bag" came on Friday and I thought it was a code thing. Then today I noticed half my lights didn't work in the front. After checking every fuse I went to pull the head lamp housing and ducked under the truck and flipped out! It looked like a group of rats had a scareface movie night gone crazy. Most of the wires were the same freakin color so it made itthat much harder to fix. After 2hours I got it all. Only thing I got backwards were some blue wires. There are three sets, I ended up wiring the blinker and "drive" lights on the same circuit so they go back and forth when the turn signal is on. I like it though so I left it. Anyways, serious warning about that front harness!!!!

Hmmm, you soldered/heat shrinked everything right? Otherwise future corrosion will drive you mad.

i heat shrunk everythimg pretty well...and i heated up the electrical tape fter wrapping, hopefully t holds for a long time