dur0maxx
03-28-2009, 11:08 PM
I just bought them today, Nitto Terra Grapplers in 295/75/16's. I searched before I bought them to see if they would fit and low and behold I search after I buy them and now I'm second gueesing it. I know the will rub, but how bad? They are gonna go on the stock PYO's for now. I just want the truck to look like a HD should have from the factory. I also wanted to purchase a set of Cognito UCA's so my ride won't be so bad but now that I look at the site it says that 285 is the biggest.
So what should I do? Put 'em on and see how it goes, or now way they will fit these tiny fenders.
jbrown1132
03-28-2009, 11:30 PM
a buddy of mine has 315-65-16 on a 2008 with front keys and a block in the back. he had to trim the inner fender well and zip tie the cab side fender well back futher.
LMM_Guy
03-29-2009, 05:06 PM
315/70/17's have been fit with a 3" lowering kit.......so it can be done. You may need to do some trimming to make it happen.
dur0maxx
03-29-2009, 08:06 PM
Well, They fit!!:D:D:D
I have had it rub once on the drivers side but only at full lock. I still have plenty of room between the UCA and the bump stop, however on hard bumps the shocks are liminting the drop out. Went from 38.5" from the ground to the fender to 41.5" Anyway, onto the pics:
http://www.dieselplace.com/forum/garageimage.php?do=full&p=88124&d=1238371112
http://www.dieselplace.com/forum/garageimage.php?do=full&p=88125&d=1238371128
http://www.dieselplace.com/forum/garageimage.php?do=full&p=88126&d=1238371138
http://www.dieselplace.com/forum/garageimage.php?do=full&p=88127&d=1238371151
http://www.dieselplace.com/forum/garageimage.php?do=full&p=88128&d=1238371163
http://www.dieselplace.com/forum/garageimage.php?do=full&p=88131&d=1238371191
http://www.dieselplace.com/forum/garageimage.php?do=full&p=88132&d=1238371204
Let me know what you guys think:cool:
Looking Stock
03-29-2009, 08:54 PM
Looks good
I have a 07 classic with the same tire and wheel setup. They are going to do real well for about 30k. Just keep around 52 psi and rotate every 6k and you will do beeter than me. I have 38k on them know and they have rounded out and stated cupping. I am going to H2's with 295's next will have them this week. :D
coldLBZ
03-30-2009, 12:08 AM
Looks great, are those tires D or E load? Thanks.
dur0maxx
03-30-2009, 07:03 AM
D-load, so yep, my TPMS light is on. But they do ride better though.
Surfer1
03-30-2009, 09:16 PM
Did you end up trimming anything at all? can you post a pic of where it is rubbing?
dur0maxx
03-30-2009, 09:35 PM
It's just rubbing the plastic liner. I didn't trim anything yet, and don't think I will. It's not bad at all. I will get some pics up tomarrow.