light in door [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: light in door


rockinduramax
03-25-2009, 11:15 PM
hey guys i was wonderin what size bulb is in the door? imma change em out soon but dont know what they are. im thinkin they are the 194

Lone Wolf
03-25-2009, 11:47 PM
Should be 194 if I remember correctlly

nekkidhillbilly
03-25-2009, 11:51 PM
194

heymccall
03-26-2009, 01:04 AM
Definitely a 194, and there is a link here in post #2 to help you get to it. http://www.dieselplace.com/forum/showthread.php?t=291870&highlight=answered+asked

nekkidhillbilly
03-26-2009, 03:18 AM
actually you can pop it out without removing the door just take a screwdriver and pop it out

i wasnt aware of this until the other day

110crash
03-26-2009, 11:37 AM
actually you can pop it out without removing the door just take a screwdriver and pop it out

i wasnt aware of this until the other day

Yeah but make sure you pop out the whole thing. The lenses light to break off and they crack. Just becareful.

nekkidhillbilly
03-26-2009, 10:59 PM
Yeah but make sure you pop out the whole thing. The lenses light to break off and they crack. Just becareful.

yeah

110crash
03-27-2009, 10:02 AM
I also put LED's in mine. You can find them pretty cheap on Flea bay. I got a lot of 10 for $6.

rockinduramax
03-27-2009, 05:41 PM
so if i just pop it out what has to come out?

110crash
03-27-2009, 06:12 PM
so if i just pop it out what has to come out?

Pop out the whole carrier the bulb fits in so you have it hanging out of the door by the wires. Then push the bulb holder tabs in on each side and the bulb with the wires and socket come out and that is all you have to do is pull the bulb out of the socket and push the new on back in and put it all back together. If you put in LED's they have to go in a certain way for them to work. If you put it in and it doesn't work pull it out and turn it around and put it back in.

rockinduramax
03-27-2009, 09:28 PM
this is without taking the door panel off right? do u just pop it off with a flathead screw driver?

110crash
03-27-2009, 10:24 PM
this is without taking the door panel off right? do u just pop it off with a flathead screw driver?

Yes.