|
swangin68 03-12-2009, 04:56 PM does anyone know what i can do to wire a kill switch,, to the ignition switch or something.. i wanna basically kill the ignition if someone trys to jam a screwdriver in it to steal it,, it has been done before but luckily they didnt get it Brad92 03-12-2009, 05:28 PM a truck like that pretty much needs a kill switch. our diesel has a toggle switch from the previous owner that when its on, you have to press the brake and hold or the truck won't start. not sure how its wired though swangin68 03-12-2009, 07:42 PM sounds sweet to have .... wish i knew what i was doing,,lol... LtEng5 03-13-2009, 01:04 AM look up and find he fuel shut off wiring. tap a switch in series there and when the switch is off; no power to the injection system = truck wont run. AlligatorPerformance 03-13-2009, 01:09 AM I have a switch for my FASS HPFP. It will flow through enough to get you to about 35 40 mph, then low rail pressure code, then the truck dies. Perfect for leaving would be thief's high and dry... swangin68 03-13-2009, 03:33 PM look up and find he fuel shut off wiring. tap a switch in series there and when the switch is off; no power to the injection system = truck wont run. sounds like a good idea,, wondering if there is such a wire to the fuel pump ? to tap into. | ||