cut a big hole in the fire wall where the aux spot is, on the drives side just above the motor. i know people have talked about that spot before just dont know where to start and look for it. at any rate can anyone give me a part # or something, any help would be great!! :)

:nopics: No I'm joking. But seriously, I think a pic of where you're talking about would help.

go to Home Depot, under the hardware section, they have some or try Ace Hardware.. And if you cant find it at either place, mcmaster.com has your back!

I second the mcmaster.com if you can't find one locally. They have just about every odd and end you could ever need.

Try www.mcmaster.com for too many choices in rubber grommets. :)

PCV Valve grommet form Auto Zone was what I used.

when my computer is up and running will do some pics. but if you go and look on your own truck, on the engine side of the fire wall, where it starts to wrap around the motor you will see about a 2" or so hole in the insulation. go inside, and look just above the gas pedal(its up there a little ways) and you will see another hole in the insulation.

IC, nothing going through it though?

You might also try:

www.grainger.com

TT

what vehicle did you get the pcv valve gromet for?