i have edge w/ hot, afe stage 2,PPE boost valve,BD convertor,5" exhaust. was wondering whats the next move, was thinking a BD lift pump , or big head waste gate not sure whats my next move. 95% i street race and 5% towing heavy

i would say efi live then turbo

UMM....fully modded tranny?

UMM....fully modded tranny?

+1

then comes EFI live, which results in low fuel pressure causing the need for dual CP3 kit.

Then comes bigger injectors to better use that fuel pressure.

Then comes the turbo explosion, which results in a bigger turbo

Then comes lifted heads/bad head gaskets, which results in headstuds and new gaskets.

Then comes short-rod syndrome (bent connecting rods), which results in a set of crower (or equivelent) rods.

Then comes cracked pistons, which results in a set of cut and coated pistons.


depending on how far you wanna go...its gets real expensive real quick.

:rolleyes:

+1

then comes EFI live, which results in low fuel pressure causing the need for dual CP3 kit.

Then comes bigger injectors to better use that fuel pressure.

Then comes the turbo explosion, which results in a bigger turbo

Then comes lifted heads/bad head gaskets, which results in headstuds and new gaskets.

Then comes short-rod syndrome (bent connecting rods), which results in a set of crower (or equivelent) rods.

Then comes cracked pistons, which results in a set of cut and coated pistons.




depending on how far you wanna go...its gets real expensive real quick.

:rolleyes:

X2 on the tranny, then ditch that Edge for EFILive.