bmemse
03-09-2009, 08:47 PM
I have a 2007.5 LMM with a rattle in the stereo. Any idea how to get in behind the stereo on an SLT interior? Looks pretty complicated without dis-assembling the whole dash......
|
nekkidhillbilly 03-10-2009, 09:08 PM dash comes apart easy bmemse 03-11-2009, 07:17 PM That Helps.....Have you seen the 2007.5 dash? If you have a suggestion for getting behind the stereo without taking the entire dash out of the truck, that would be good. As you can see by the second picture. The large piece that surrounds the stereo/heater control stack is one large piece that goes from one side of the truck to the other surrounding the guage cluster, the air vents, etc...... I would prefer not to disassemble the entire truck if possible! Any real suggestions out there? heymccall 03-11-2009, 08:59 PM Page 4 here http://documents.victorytechnologies.com//documents/product/8581.pdf And use a plastic spatula to get under the edge. Or, watch the movie here http://www.coastaletech.com/gmlockpick1.htm bmemse 03-12-2009, 10:14 PM Page 4 here http://documents.victorytechnologies.com//documents/product/8581.pdf And use a plastic spatula to get under the edge. Or, watch the movie here http://www.coastaletech.com/gmlockpick1.htm Thanks! That's perfect, exactly what I was looking for. Didn't want to tear up the dash! raupp381 03-12-2009, 10:18 PM Page 4 here http://documents.victorytechnologies.com//documents/product/8581.pdf And use a plastic spatula to get under the edge. Or, watch the movie here http://www.coastaletech.com/gmlockpick1.htm x2 heymccall 03-15-2009, 05:11 PM Well???? How'd the movie turn out? Will there be a sequel? :ninja: bmemse 03-16-2009, 08:03 PM Well???? How'd the movie turn out? Will there be a sequel? :ninja: Awesome!! Thanks for the help. Pulled everything out and put foam material all around! | ||