Ok cold starting it cranks for a long time 10 or more cranks. Hard starting the samething.
The Glows are new and working , but if i change the PMD,which should be here i hope on Friday, will this correct my problem with no power hard starting?

MAybe Injectors what do you guys think?

THANKS AGAIN

Doubt it. How much fuel pressure is present at startup? What battery cables and connectors you using, the stock units are totally suspect of harboring corrosion and white oxidation.

Lift pump is new and OPS will bbe tomorrow.

And the cables? stock or upgraded?

Stock what do you suggest i get for cables Qm?

Cut off the side mount connectors, peel back the protective covering and put on top post connectors, brass would be best but those lead ones will work fine also and are cheap too, just need cleaning more often.

I cleaned the originals and cut the plastic crap around them and put nut and bolts to the battery.

Go with the brass and top post next time you buy new batteries.

They are new batteries. I am going to clean all the grounds and see if that helps.

Thanks