So I called the local alli shop to get a deep pan for my truck and the guy was asking me if the dipstick and the pump would be able to handdle the extra fluids, etc etc. SO what I need is a part number for the pan so I can get it from this guy soon. I alrady have my trans go jr and just needing the deep pan. Any help would be great or even a vendor on hear that I can buy it from.

Thanks Kyle

Look in the vendor section for Performance Truck products. If I remember correctly he was running a special on the deep pan. His name is Nate DSTRBD is his screen name here look him up and get hooked up! The best thing of all is he is a vendor here.

Dane

Thanks dane, How much trans synd will I need for this mod? Would it be safe to use air to blow the tranny cooler out if I use a low air pressure?

Thanks dane, How much trans synd will I need for this mod? Would it be safe to use air to blow the tranny cooler out if I use a low air pressure?


Well I believe you will need about 5 gallons some say 6. It depends on how you look at it. As far as the cooler the oil is going to circulate through the cooler so if you blow it out your doing extra work taking lines off that you don't need to. Just pump the oil through the system Via the hoot method and be done with it.

I can also get you the Amsoil Clone fluid most likely at a better price if your interested.

5-6 Gallons? If you aren't flushing it (just installing the deep pan) then it holds a hair shy of 12 quarts. The cooler and lines another 2.

To flush it until clean fluid comes out, then yes it will take about 20 quarts.