|
captkirk 03-02-2009, 04:09 PM 03 Silvarado 4x4 crew. Power seat drivers side would not come forward fully. I mistakenly tried interchanging control switches with passenger side. Now I lost everything including all seat functions, seat heat and passenger windows. Does anybody know what I took out with this dumb manuver? :(:(:( GetSome8.1HD 03-02-2009, 08:04 PM Did you check your fuses in the dash and engine compartment? chevmeister 03-02-2009, 09:10 PM In the IP fuse cluster (side of dash drivers door area) check DDM (driver door module) and PDM (passenger..) fuses. Dependign on your truck config you may have a 15 amp DDM fuse, and the relay in place of the 10amp PDM fuse. Also there are 25 amp and 30 amp circuit breakers in the MBEC (under driver dash). The 25 amp is Front Passenger Door Module (FPDM),Window Switch-RR. The 30 amp is Driver/Passenger Seat Modules. Under the hood check the 50A MBEC fuse, 50A LBEC2 fuse, 50A LBEC1 fuse, 15A SIR fuse. That is every fuse that mentions seats and windows. There is a circuit breaker in the right IP fuse block but I believe it is for RAP. cujo489 03-02-2009, 11:20 PM i would start by checking your title to this thread.....:D | ||