|
rodder55 03-01-2009, 09:39 PM okay so i was trying to do the high idle mod with the two pins i got the pins off a guy on here. they were from the same connector and were supose to just slide in to place. i tried for about an hour in all different directions but it seemed too hard to plug in i also didnt want to wreck the pins so i did not push as hard as i could how do they slide in any help would be appreciated rodder55 03-03-2009, 01:13 AM no ideas eh well i bought some termial remover tools today hope fully they will help get it in the slots bballer182 03-03-2009, 01:20 AM the purple locks have to be slid out also. rodder55 03-03-2009, 02:27 AM i used a bobby pin type thing to push all the jelly like crap out it poked all the way thru also use a 3/32 drill bit Andrew85 03-03-2009, 04:27 AM dumb question but what is the high idle mod for a lbz? CtChevy427 03-03-2009, 10:40 AM My 06 has high idle from the factory turned on and off from the steering wheel controls. bballer182 03-03-2009, 09:57 PM My 06 has high idle from the factory turned on and off from the steering wheel controls. Different mod... this one uses the PTO high idle which adjustable instead of the ecm doing all the thinking do a search for "LBZ PTO high idle" bballer182 03-03-2009, 09:58 PM i used a bobby pin type thing to push all the jelly like crap out it poked all the way thru also use a 3/32 drill bit yeah i used a filed bobby pin too:D; to ensure the pins were all the way down there ANDREW2500 03-03-2009, 10:04 PM okay so i was trying to do the high idle mod with the two pins i got the pins off a guy on here. they were from the same connector and were supose to just slide in to place. i tried for about an hour in all different directions but it seemed too hard to plug in i also didnt want to wreck the pins so i did not push as hard as i could how do they slide in any help would be appreciated IF YOU PUSH THE 3/32 DRILL BIT IN AND TWIST IT A FEW TIMES THE PINS WILL GO IN THEY NEED TO SOMEWHAT SNAP IN IM GLAD YOUR PINS ARRIVED TO YOU rodder55 03-04-2009, 01:47 AM i think i finally understand what you mean the purpling things gotta be slid out maybe the third try is the charm and thanks andrew2500 for the pins again ANDREW2500 03-04-2009, 04:46 PM no prob hope it works rodder55 03-05-2009, 01:35 AM alright update time... got er to work today after some few choice words a busted pin and some fiddling but all in all very happy with the results | ||