hi i just want to know if there is anyone that sells a EGR Delete kit ???i want my egr out...thanks.:cool:

Kennedy diesel. Look in the vendor section.

You can't nec "delet" it. I believe you just block it and put a fingerstick in. It's the same effect and is hard for the dealer to ever notice.

i just took mine off last night... so yes they can be deleted.....

I removed the cooler, but had to use the egr manifold to mount the intake manifold to. Made some 1/4" blocker plates and installed a hose from the firewall fitting to the engine fitting. Just bypassed where the cooler was. Worked out pretty good.

nice ! imma try that !

i just took mine off last night... so yes they can be deleted.....

Care to explain what you did with the wiring and plugging the hole? What codes are you seeing?

bump

I removed the cooler, but had to use the egr manifold to mount the intake manifold to. Made some 1/4" blocker plates and installed a hose from the firewall fitting to the engine fitting. Just bypassed where the cooler was. Worked out pretty good.


I did the same thing.

Think I will do the same.

I have done the same as well, I just used the gasket as a template, and cut a piece of 1/4" with the plasma at work.

Care to explain what you did with the wiring and plugging the hole? What codes are you seeing?


If you take the valve all the way off tape the harness up, use efi live to eliminate the codes, and fab up a support for the intake and make sure the ports have a good flange to seal to.

I have done the same as well, I just used the gasket as a template, and cut a piece of 1/4" with the plasma at work.
I cut the flange off the up pipe and welded a plug in it's place.

BTW,
This is what the EGR valve looks like and where the intake mounts to it just so you know what you're up against. (http://www.dieseltowingresource.com/showthread.php?p=105991#post105991)