|
: Juice Attitude Display goes dim......... gman915 04-11-2005, 02:36 PM Has anyone else had this problem. I have an Edge Juice with Attitude (ver 4.81 I think) and have been using it for about a year now. Lately the Attitude monitor will get faint until you can't see the display. The Juice is working fine. If you hit the menu button, the display will show everything perfect. Once you hit enter to display the status, it fades away again. I also have to note that this is an intermittent problem. Some times it displays perfect. Thanks:) 502_Jimmy 04-11-2005, 02:47 PM I have the exact same problem.. I am hoping someone will have an answer to this. kartdude17 04-11-2005, 04:31 PM Mine go dim to sometimes, but if i bump it it comes back on then will go back off??? snowho 04-11-2005, 05:34 PM I have seen this problem several times, usually it progressively gets worse. Have the unit replaced by Edge. Aaron toy fever 04-11-2005, 05:40 PM I had this problem. Called Edge and they shipped me a new one. Try giving them a call. alaskaduramax 04-11-2005, 10:23 PM mine has done this twice now. got to the point that it was a blank screen. shut off the truck and restarted and all was good. figured i would let it happen a few more times before i called edge for a new one. only been in the truck for about a month and a half. other than that i am totally happy with the e/a settup. i can't wait to get a tranny behind her to let her rip! Kennedy 04-12-2005, 10:43 AM I have seen this problem several times, usually it progressively gets worse. Have the unit replaced by Edge. AaronI agree. It's not altogether too common, but when it does happen it only gets worse. P.S. Nice to see a fellow vendor respond where there's not an immediate sale to be made.:cool2: gman915 04-12-2005, 11:31 AM Well I contacted Edge and they are cross shipping me a new Attitue. They say that they have had a few problems with some of them (I'm assuming certain versions). Mine is ver 1.4i on the Attitude, and 4.81 on the Juice. So I guess the only solution here is to contact Edge and get it replaced. Oh by they way, they will want the info from the tag that was on the Attitude's back cover, so if you are like me, and removed the back cover to fit it flush in the ATS mount, you might want to track it down. Good Luck!! :lol: 1-888-360-EDGE Ext. 127 for Nate | ||