jmiller12
02-21-2009, 09:15 PM
is injectors worth the money
|
DrHolliday 02-22-2009, 12:30 PM I'd say yes, b/c with bigger injectors you can lower your PW and decrease your timing and still get the same fuel in and power out. I'd be worried about your stock motor with upgraded turbo and injectors though, its like gambling with your LBZ pistons. JC1843 02-22-2009, 01:12 PM You don't need bigger injectors until you make 500-600 horsepower. Spend the $$ on a nice trans upgrade or other items. :D emiller3 02-22-2009, 01:17 PM You don't need bigger injectors until you make 500-600 horsepower. Spend the $$ on a nice trans upgrade or other items. :D It shows he already has a built tranny in his sig.What other items would you suggest,modded or duel cp3? jmiller12 02-22-2009, 04:53 PM yea what mods do yal suggest instead of injectors DrHolliday 02-22-2009, 05:04 PM I'm going to be doing something similar to your set up this fall. I plan on building the motor though. With that turbo you have, dual fuelers and 60% over injectors JNeal made 750 rwhp with is LBZ IIRC. If I was in your shoes I would upgrade your pistons and rods, then push that thing to the max with dual fuelers and injectors. emiller3 02-22-2009, 05:06 PM Get some injectors jmiller12 02-22-2009, 05:07 PM about how much would i be looking at spending to upgrade rods and pistons DrHolliday 02-22-2009, 05:12 PM Won't be cheap, cal Guy at SoCal diesel, he's the expert and sells all the stuff. emiller3 02-22-2009, 05:19 PM What about Curtis @ DPR or Steve @ TTS, they have good products too. emiller3 02-22-2009, 05:51 PM Call me I am doing a rebuild right now. 3372742001 jmiller12 02-22-2009, 06:38 PM send me a pm on how much rods and pistons cost jmiller12 02-23-2009, 12:10 AM emiller what do you think about industrial 's injectors emiller3 02-23-2009, 07:31 AM Do not know to much about industrial's but this is a little info from anoher thread on this site.I am personally leaning towards Don M's fusion injectors right now. You can get pricing and info here http://www.hdiesel.com/product.asp?id=140. dmerre89 02-23-2009, 10:54 AM Try Fleece's Injectors jmiller12 02-23-2009, 01:24 PM how do you like your 68mm turbo so far | ||