08DMAXMIKE
02-13-2009, 02:14 PM
I'll take a couple of guesses then post what I found inside it.... Sgt. B. no telling
|
: Removed the 6.6 domiflotcy and guess what I found? armylifer 02-13-2009, 02:23 PM What is a "domiflotcy"? mnpatriot 02-13-2009, 02:26 PM There are a lot of dumiflotchies. Tell us which one you removed!!! A dumiflotchy is the same as a thing-a-ma-jig. armylifer 02-13-2009, 02:32 PM Then my guess is that he found oil in it. irish yankee 02-13-2009, 02:57 PM dirt from a crack irish yankee 02-13-2009, 02:58 PM nest of mice irish yankee 02-13-2009, 02:59 PM I have it now nothing good shep 02-13-2009, 03:03 PM Last year's Easter Egg??? firecapt870 02-13-2009, 03:38 PM the door skin Sgt Badger 02-13-2009, 03:49 PM I will give you guys a hint. It has 6.6 stamped on top. silveradoman4 02-13-2009, 03:57 PM What is a "domiflotcy"? X2 Unit453 02-13-2009, 04:19 PM I will give you guys a hint. It has 6.6 stamped on top. A resonator full of air? Harnett county...I lived in Spring Lake for a few years...(Bragg) TwistedLogic010 02-13-2009, 04:41 PM A slightly used condom??? wildcatbrownhound 02-13-2009, 04:54 PM a Turd XTINCT 02-13-2009, 05:00 PM ugghhhh........... louisianarebel 02-13-2009, 05:14 PM rat nest... money? haha RaceDUCATI 02-13-2009, 05:19 PM Was it the original copy of the United States Constitution, which was hidden there by David Axelrod when our new president told him to “get rid of this thing”? That would be my guess. DuramaxSMOKE11 02-13-2009, 05:25 PM Was it the original copy of the United States Constitution, which was hidden there by David Axelrod when our new president told him to “get rid of this thing”? That would be my guess. thats a good one lol onebadf150 02-13-2009, 05:32 PM a flux-capacitor ? alvareracing 02-13-2009, 05:36 PM a medium size chicken ! 08DMAXMIKE 02-13-2009, 06:15 PM Good guesses.... I removed the resonator to plug it off and the inside was coated with a light film of oil and had plastic rattling around it....from the molding process I guess...... doesn't matter now as it is plugged and will stay that way unless I have an issues under warranty and I'll remove the plug and reinstall it. Geekster 02-13-2009, 06:33 PM What did you use to plug the hole? I tried to search on thing-a-ma-jig and such and can't find the original post that had the steps to take that thing off. Thanks.. 08DMAXMIKE 02-13-2009, 06:47 PM Loosen the lower clamp and pop it off....I used a rubber 2" expansion plug from the local hard wear store.....the wing nut is cast aluminum on mine so be careful not to over tighten it...I removed it and installed a larger flat washer and a nut..... 7fayette 02-13-2009, 07:21 PM Loosen the lower clamp and pop it off....I used a rubber 2" expansion plug from the local hard wear store.....the wing nut is cast aluminum on mine so be careful not to over tighten it...I removed it and installed a larger flat washer and a nut..... Why or how does it help? 08DMAXMIKE 02-13-2009, 09:54 PM You get more turbo noise (especially under load) and the resonators are prone to cracking and letting in unfiltered air.... so mostly peace of mind :cool: grandpa67 02-14-2009, 01:34 AM I thought you were going to say you found a "Made In China" tag. 08DMAXMIKE 02-14-2009, 09:07 AM I thought you were going to say you found a "Made In China" tag. I imagine the turbo ate that long ago :D Peter34668 02-14-2009, 09:22 AM Was it the original copy of the United States Constitution, which was hidden there by David Axelrod when our new president told him to “get rid of this thing”? That would be my guess. Too funny :) DuramaxSMOKE11 02-14-2009, 09:52 AM i used a quick cap. its a 2" plug that slips right over the hole with a hose clamp around it and its better than the expanson plugs cause it wont loosen up. i got mine at home depot in the plumbing section Sacket 02-14-2009, 10:52 AM 08DMAXMIKE, How are you tail lights working out for you? It sure was an improvement from where you started. Runaway 02-14-2009, 11:01 AM You get more turbo noise (especially under load) and the resonators are prone to cracking and letting in unfiltered air.... so mostly peace of mind :cool: Really, now this is one I haven't seen or heard of :rolleyes:. 08DMAXMIKE 02-14-2009, 11:35 AM 08DMAXMIKE, How are you tail lights working out for you? It sure was an improvement from where you started. LOVE them...they are 1000 X better than the crap the body company installed on it.... wigglez 02-14-2009, 01:10 PM thats what i used...less chance of something fallin in i used a quick cap. its a 2" plug that slips right over the hole with a hose clamp around it and its better than the expanson plugs cause it wont loosen up. i got mine at home depot in the plumbing section | ||