|
dc78 02-12-2009, 10:12 PM I am thinking about selling my truck. I was getting white smoke. Put my PPE programmer on it was showing PW on #8 was low. Took it in to dealer he says #8 injector bad. I have them replace that one only since I am going to sell truck. I am still getting white smoke till it gets to 190 degrees then quits. Dealer says may have addtional weak injectors. My radaitor hose is not hard and I am not getting bubbles in coolant reservoir. What could be my problem? Horsehaulin 02-13-2009, 06:24 AM Exactly what the dealer said, other injectors can be bad. I dont know much about PPE, but can you check injector return rates/balance? sparky1562 02-13-2009, 07:58 AM I dont know much about PPE, but can you check injector return rates/balance? PPE can not check balance rates, even though the manual says it can. Only PW. dc78 02-13-2009, 01:37 PM The dealer checked balance rates, found #8 injector was bad. When balance rates where checked how come more then one injector did not show up bad. I put the PPE programer on now all pulse wideths are pretty close at idle at 60 mph all PW are same. Horsehaulin 02-13-2009, 11:04 PM Time to get EFI Live? Just kidding, dont know why they would wait until you got the one done then try to get you to pay for the rest! Thats two times the labor for one side! Good luck. | ||