I lost my mph gauge, engine temp gauge and my boost guage sits at 0 and sometimes goes up to 10psi when I'm not even moving. My EGT or pyro seams to still be working. Have any of you experienced this prob or heard of it. Could it be a loose wire somehwere or do ya think it needs to go back to bullydog? I bought the truck used and it was already installed and it wasn't wires up the best. We're talking electrical tape connections and crappy running of the wires. What I don't get is if it were a loose wire, whay would I still have pyro and a 0 and 10psi popping up on the boost guage.

Pyro is on a different lead vs the other readings. sounds like you have a bad plug/ corosion or something

So does the 10 psi reading mean that the MAP sensor is still getting some kind of a reading? It only shows 10psi whenever it does get a partial reading and I know it's not hitting 10psi. Bullydog culdn't answer my question and just told me to send it back. Well, that's gona be like over a 100$ and If they tell me nothing is wrong, i'm gona be pissed.:cool:

what year of truck? they shouldnt charge you if they dont find anything wrong

Do you have the right vehicle selected?

It's an 06 2500hd crew cab. Well, all I know is that it worked one day and the next day it didn't

Try reselecting your vehicle and check all the connections. If that don't work then call BD and dial ext. 2148 for Gary. He will help you out.

Try reselecting your vehicle and check all the connections. If that don't work then call BD and dial ext. 2148 for Gary. He will help you out.

Dude you totally saved my a$$.. That was what the problem was. I don't know how it got on 06 ford 6.0 seriously. I reselected the vehicle and she works like a champ again. I woner why BD couldn't tell me that. Anyway, thanks a ton man!

Kix

Good to hear man. No problem. Been doing this for a while and seen this kinda thing before;)