|
: Help! problemchild 12-12-2003, 06:13 PM My 03 high idle is not the same. I have 2 seperate pieces numbered 0-32. My truck is all apart and I want to finish this. Anyone know what to do? I have one clear plug and one red. Both labled 0-32 on the pin holes. Will post pics later.... problemchild 12-12-2003, 06:24 PM the pics http://webpages.charter.net/m.dickson/CRW_4293.jpg http://webpages.charter.net/m.dickson/CRW_4295.jpg http://webpages.charter.net/m.dickson/CRW_4297.jpgEdited by: problemchild BlueOx03 12-12-2003, 06:44 PM You need the ECM plugs, I believe those are the TCM plugs. problemchild 12-12-2003, 06:48 PM I followed the info from kennedy. It said remove black cover from radiator. Remove ecm from cover. Remove plugs from ecm.I did that. This is the piece in front top by radiator. There are no other pieces???? problemchild 12-12-2003, 06:56 PM I see another black box. I think thats it. BlueOx03 12-12-2003, 07:14 PM Check out these pics, They should help you get on the right track. High Idle pics (http://dieselplace.com/forum/forum_posts.asp?TID=1006&KW=high+idle+) problemchild 12-12-2003, 07:15 PM Arrrgghhhh........ Sometimes Im so dense....... I found it...thanks.. Now that its dark http://www.dieselplace.com/forum/smileys/Clap.gif BlueOx03 12-12-2003, 07:50 PM Never fails... Better dark than rain. It's a good idea to plug those plugs back in overnight to keep moisture from building up due to temp changes. Good luck in the morn... Ox | ||