voyson007
01-23-2009, 12:18 AM
Anyone know how to lift the front of a 1990 Suburban 2500 2wd 2" or so? I cant find coil spacers.
|
tinypeckerwood 01-23-2009, 12:41 AM I think you could use lift spindles or put in longer coil springs. wt tom 01-24-2009, 01:28 AM i had a 89 swd and fabtech is the only one with the lift. they have a 3inch new coil lift and a 4 or 6 inch longtravel kit. you wont get to high with that truck. frame is different than the 4wd also so throwing a solid axle is pretty much out of the question. if i recall i got my 3inch coil lift for 400. it came with coils balljoint spacers and rear blocks. ' wt tom 01-24-2009, 01:33 AM 1989 2wd 1500 suburban 3inch body lift 3inch fabtech spindle/balljoint spacer lift 33's http://www.fabtechmotorsports.com/applications/gm/2wd73-98c1500.html#appinstruc its near the bottom http://4wheelonline.com/Products.aspx?CategoryId=32955&ProductID=91914 wt tom 01-26-2009, 12:43 PM u figure anyting out yet voyson voyson007 01-26-2009, 04:07 PM Ive been busy getting the dealer fix my injectors and glow plugs on my 02 lb7.Thanks for your help, I think I may go with the Fabtech 3'' kit. Your suburban looked really cool, thats about what I'm going for. Theres a guy in the 6.2 forum with a similar question and some good replies. wt tom 01-26-2009, 06:21 PM good to hear. best of luck | ||