shlads
01-22-2009, 04:29 PM
What kind of EGT numbers are too high?
|
Hammer 4 01-22-2009, 04:48 PM 1200...or more shlads 01-22-2009, 08:44 PM I was seeing 950 to 1050 for short times so thats ok kfx700rider 01-22-2009, 11:02 PM over 1600 for a long period and your at risk of melting something tinypeckerwood 01-23-2009, 12:57 AM I do not sustain anything over 1400* It does depend on where you have your probe though. It should be in the exhaust manifold, some put it in exhaust after the turbo. If that is the case then I would stick with 1200* max sustained. rocjunkie 01-23-2009, 01:09 AM I have been as high as 1700 for a brief second racing it... around 1000 and you should not worry at all IMO. X2 on probe in exhaust manifold. genesis 01-23-2009, 10:06 AM 1250 all day long shlads 01-23-2009, 02:16 PM so i'm not even close to hurting anything jonathancasey19 01-23-2009, 02:44 PM fill out ur sig JustinD 01-23-2009, 02:57 PM I see 1790's with EFI live!!! volumejunkie 01-23-2009, 04:54 PM The dmax was built to sustain a 1300 degree max sustained egt. Depending on how long you are higher than that depends on how bad it is. jonathancasey19 01-23-2009, 08:53 PM 1790??? jesus..... i would have figured that water/meth would have helped more than that JustinD 01-23-2009, 09:37 PM straight water helps but when I mix it with Meth it is around the same but pulls harder. jtaylor11 02-09-2009, 07:37 PM How long is too long. I was playing around doing a boosted lauch and around 80 to 100 it pushed alil over 1600. So a few seconds or how long? tinypeckerwood 02-10-2009, 01:29 AM I don't think you are going to hurt it in a few seconds. I would not keep it there too long though. Maybe 20 to 30 seconds would be safe. I have held mine at 1400 for a few minutes pulling some hills with the 40 footer in tow. jonathancasey19 02-10-2009, 01:52 AM straight water helps but when I mix it with Meth it is around the same but pulls harder. might try the diamond eye downpipe? JustinD 02-10-2009, 01:39 PM I'll have to try that, Thanks. scramHD 02-10-2009, 07:13 PM Yep Ive seen 1800. Id prefer to see 1150 though,,,,,,,with the same power.....hehe. Uh Justin, I think its time for bigger turbos for me n you. JustinD 02-11-2009, 07:39 AM Yep Ive seen 1800. Id prefer to see 1150 though,,,,,,,with the same power.....hehe. Uh Justin, I think its time for bigger turbos for me n you. I agree!!!!! :D | ||