94 Yukon 6.5 Diesel Turbo CPS Reset ? [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: 94 Yukon 6.5 Diesel Turbo CPS Reset ?


Tommyinajar
03-31-2005, 03:42 PM
Hello, guess what some MORE problems with my 1994 GMC 6.5 Diesel -

I had / have the hard starting black smoke ect - With 18,35,36, and a 45 trouble codes. I replace the PMD with a remote mount from Heath Diesel and the codes (all except the EGR 45) went a way for a couple of months,now they are all back and the truck just about refuses to start-

I was told to check the injection pump timing and change the CPS (was a sob to get out) - You need a scanner to set the Injector pump timing and 'Set' the CPS , corrrect ? My scanner is not compatable with the 94 GMC diesel -

The lift pump is a new HD one and the injection pump supposedly was replaced by GM 20,000 mi Ago.

Thanks for Any help the GMC Dealership in Milwaukee WI want 1800 $+to stick in a injection pump.

ragtop rat
03-31-2005, 04:41 PM
Tommy I too have a 94 yukon w/6.5 diesel tb and have never seen another one on the road.Is yours a two door? I recently had similar symptoms and found I had clogged cat which I gutted and truck runs great. May not be your problem but it's easy to check. Just unbolt at 4 bolt flange and fire her up otherwise you might have a wastegate or glow plug problem. I was told that I needed a new Ip too.

hannaco
03-31-2005, 06:14 PM
When you go to start the motor, do you see the tach moving or bouncing around? If it does not move, the CPS could be bad.

Tommyinajar
03-31-2005, 07:43 PM
Yup its a 2 - door / Bright Red -The cat WAS plugged completely when I got it-


I installed a new crank sensor in it but now it sounds out of time in needs to be set some how according to the manual.