HELP! I changed my fuel filter today and missed one important step. I primed the new filter but forgot to open the air bleeder screw on top of the filter housing when priming. Now the truck won't start, as I must have air in the system. What do I have to do to get the air purged out. Any help would be appreciated.

Open the bleeder a bit and pump till fuel comes out. Close bleeder and pump up until hard. Keep pumping up hard until it starts.

It worked. Thanks for the help.
Another question: how is the fuel filter service life re-set in the computer? The DIC controls on the steering wheel don't do it. I can't find it in the owners manual.

You need to scroll to find "fuel filter reset" and then push and hold the reset arrow until it resets.

You need to scroll to find "fuel filter reset" and then push and hold the reset arrow until it resets.

I have the same issue, and can't find where it says "fuel filter reset" Am I missing something?

On my early 07, I just hit the reset button on the steering wheel when on the fuel filter life display.......

Mine 06 is the same as CAVelocity's