bazdad
12-23-2008, 12:32 AM
Is there an easy place to hook a boost pressure guage without tapping a new hole on a 04.5 LLY engine? Thanks for your reply and help.
|
randy_the_hack 12-23-2008, 01:05 AM Is there an easy place to hook a boost pressure guage without tapping a new hole on a 04.5 LLY engine? Thanks for your reply and help. Nope. Two choices... drill, or buy a Super Diesel intake manifold... which has ports 'a plenty for such things. Try here: http://www.socaldiesel.com/S-D%20manifolds.htm ironhorsect 12-23-2008, 09:34 AM Drill and tap is not that hard...give it a whirl gregs04.5 12-23-2008, 11:06 AM I used a 1/8" bulkhead fitting in the aluminum tube, very easy job. Parker fitting I believe, can find at most good hardware stores. kodiak 12-23-2008, 11:37 AM You could get a Aeroforce Scangauge that plugs into the OBD II port under the dash. Accurate, as long as there is not any programmer in the trucks ECM. bazdad 12-23-2008, 10:19 PM Thanks Guy's, I'll get the drill out. | ||