|
bubba 03-28-2005, 12:49 AM Hi ! Is There No Body Out There After 4 Years That Has A Bolt In Replacement Or Add On Trans Kooler Kit Yet For The Allison Auto Trans????? Hope To Here From Ya! Bubbahttp://www.dieselplace.com/forum/images/smilies/smile.gif Diesel Dually 03-28-2005, 01:33 AM So close yet so far (http://dieselplace.com/forum/showthread.php?t=11380&page=1&pp=10) kbstinky 03-28-2005, 02:04 PM Mike L, ARE YOU LISTENING................................. :grd: :grd: :grd: :grd: :grd: :grd: :grd: :grd: :grd: :grd: duramaxdiesel 03-28-2005, 03:13 PM Will any brand of tranny cooler work? Can't one just go to the local parts store and buy one? Cummin_Stroke_this_Dmax 04-04-2005, 12:42 AM Will any brand of tranny cooler work? Can't one just go to the local parts store and buy one? What he said. Is there anything bad about going to the parts store (especially since I work at one) and pick up the biggest/best aftermarket cooler available and add it to the existing cooler? Don't tell me no one else has tried it. John DiMartino 04-04-2005, 08:46 AM Im not 100% sure,but with the cooler line size,and GPM of the pump in the allison,you probably cannot get a universal cooler,the lines wont match up and it would restrict flow,and build pressure behind the cooler if you did. It is probably similar to the Dodge auto (1/2)+ line size.Us Dodge guys use the B&M engime oil coolers,they have 1/2" lines,hi GPM flow rates,and are 1.5" thich stacked plate cooler,you can get them with or without an automatic fan.If they meet the flow/pressure requirements of the allison there's no reason you cannot use them. http://store.summitracing.com/default.asp?Ntt=b%26M+super+cooler&Ntk=KeywordSearch&DDS=1&searchinresults=false&N=0&target=egnsearch.aspor http://store.summitracing.com/default.asp?Ntt=b%26M+super+cooler&Ntk=KeywordSearch&DDS=1&searchinresults=false&N=.0&target=egnsearch.asp Both these coolers should be more than adequete,and you can get them without the fans as well Diesel Dragon 04-04-2005, 08:15 PM Your links dont show the coolers Trippin 04-04-2005, 09:13 PM Look here: http://www.dieselplace.com/forum/showthread.php?t=11380&page=21&pp=10 Post #206 :D kbstinky 04-04-2005, 09:19 PM Would suggest you contact Mike L. for the cooler. It is a "drop in unit". No bending, splicing, adapting, praying. His cooler is designed to replace "exactly" the OEM unit. Good luck. duramaxdiesel 04-05-2005, 12:02 AM Yeah, but is it available now? kbstinky 04-05-2005, 12:17 AM Mike posted a price. One would assume that all the pieces have come together. Only Mike L can answer that question. And if it is another week off, I would be willing to wait. Mike L, now is the time to chime in. | ||