|
problemchild 12-10-2003, 01:34 AM I need to buy/order the high idle parts for this weekend install. I also need the white cap for the front diff and synthetic install. Can I use a broken drill bit or nail for the high idle pin? Any substitute out there? Mackin 12-10-2003, 06:53 AM Then I would hustle down to the dealer pick up Terminal GM part #12084913 .... Go to auto parts store get some 20 gauge wire and perhaps a momentary switch and fuse tap ..... Or forget the switch and tap the Dk Grn/Wht, on the Stop Lamp Switch to he TCM .... Mac http://www.dieselplace.com/forum/smileys/Ermm.gif BlackZ71 12-10-2003, 08:36 AM Mackin if i don't use a switch and use the stop lamp switch. do i just run a wire from c-71 right too the dark green/white wire? Just want to make sure before i do this. Fireman 12-10-2003, 09:08 AM Mackin if i don't use a switch and use the stop lamp switch. do i just run a wire from c-71 right too the dark green/white wire? Just want to make sure before i do this. That is exactly how to do it...No switch is needed. BTW, ProblemChild, I used the terminal itself to puncture the yellow insulation, and I put a dab of dielectric grease on it to help keep moisture out. http://www.dieselplace.com/forum/smileys/Big Smile.gif KevinEdited by: Fireman BlackZ71 12-10-2003, 09:21 AM Mackin if i don't use a switch and use the stop lamp switch. do i just run a wire from c-71 right too the dark green/white wire? Just want to make sure before i do this. That is exactly how to do it...No switch is needed. BTW, ProblemChild, I used the terminal itself to puncture the yellow insulation, and I put a dab of dielectric grease on it to help keep moisture out. http://www.dieselplace.com/forum/smileys/Big Smile.gif Kevin Well that's easy enough http://www.dieselplace.com/forum/smileys/Approve.gif problemchild 12-10-2003, 10:05 AM None of the dealers withing 50 miles have the parts, I called all of them. Thats why Im asking here! dmaxalliTech 12-10-2003, 11:31 AM i have them CADman_ks 12-10-2003, 08:44 PM None of the dealers withing 50 miles have the parts, I called all of them. Thats why Im asking here! My dealer has 4 of them, because they charged me $3 for just one!!, I wasn't about to buy the whole pack of 5!! cadman_ks 04forme 12-10-2003, 11:03 PM If you have a salvage yard close,ask them if they have a piece of a Transmission harness with plug in off a GM vehicle with a 4L60e Transmission take the connector apart at the teminals and you can use the wire with the connector already crimped,worked great in mine Plus I have plenty extras,you will just have to splice a longer wire | ||