|
: 16x10 wheels on stock truck? DMAXPWR 12-09-2003, 08:43 PM I am looking at getting a set of wheels for my truck.I do not want to lift it,just crank the torsion bars up.So I am wondering if I can get a set of 16x10's on it or if I should go with a set of 16x8.Thanks guys,by the way great site.I am a converted F#&d man. Dmax Tim 12-10-2003, 09:23 AM What size tires do u want to run? The best deal on rims is the H2 17" ones. 1BADHD 12-10-2003, 09:29 AM 16x10 with 285/75/16 will not fit. UNLESS you trim a lot of inner fender and lower valance. A 16x8 with 285/75/16 does work. This is first hand info. 1bad01 12-10-2003, 02:15 PM I agree with 1BADHD. Kyle03D 12-10-2003, 04:07 PM I was looking at 16x10's or 16x8 because I want the wide tires look. I was thinking 16x10's would not work with 285/75-16s because the tire could not be put on a rim that wide. But if they can I might be looking into 16x10's. The smallest backspacing on 8in rims i can find is 4". Anyone know what the backspacing and width of factory rims are? Kyle 1BADHD 12-12-2003, 10:14 AM 285 will fit on a 16x10 but will look like this..... http://www.imagestation.com/picture/sraid57/pcb5ae1cae05c28179f47d58063e50716/fc6f784a.jpg They will be buldged. I ran this set up for 2 weeks before my lift. it rubbed BAD!!! Just giving you fair warning. It will only work with a sawzall massacre! You can look around, you can find wheels with 3-5/8" BS. A stock wheel has 5" BAS. Any other questions, let me know. FYI, here is my truck with 16x10's, 285/75/16 and bars cranked. http://www.imagestation.com/picture/sraid57/pada8e5b9478b2d313bb5be252bebf1b0/fc6f7845.jpgEdited by: 1BADHD | ||