How many people on here are running a fuel pressure guage? When I start installing guages on my truck I was planning on putting one on mine. I feel it could help me out on diagnostic reasons if I could monitor what the fuel pressure is doing all the time.

What do you think?

Thanks for the response in advance!

I am running an Autometer electric fuel pressure gauge. I put the sensor between the fuel filter and the water drain. It was easily accessible. I believe this is still on the "dirty" side of the filter, so the pressure measured downstream of the filter may be lower. It provides great feedback on LP operation. I also wired a green LED to the LP positive lead. If the light is green, the LP is getting power. It will let me know if the OPS ever gives out.

Jake

I get one electric, from Glow Shift.
I have placed the fuel press sensor between the lift pump and the fuel/water separator (DAHL), wich is itself placed before the stock fuel filter.
Some would recomend to put the sensor at the drain T-valve wich is just before the pump---

That's a real improvement, as you can monitor your fuel pressure. This is how I knew my previous LP failed.

About the OPS, the relay mod helps a lot ;)

I hop in my friends truck and I notice 2 boost gauges. One for boost, one for fuel pressure!!! LOL, I found it pretty funny and inventive. A cop pulls you over and sees two boost gauges in the truck he probably wont think much of it. Sees a boost and fuel pressure gauge in the truck, might write you up.

I am running an Autometer electric fuel pressure gauge. I put the sensor between the fuel filter and the water drain. It was easily accessible. I believe this is still on the "dirty" side of the filter, so the pressure measured downstream of the filter may be lower. It provides great feedback on LP operation. I also wired a green LED to the LP positive lead. If the light is green, the LP is getting power. It will let me know if the OPS ever gives out.

Jake

Know that is a good idea! Thanks!

If you dont mind I will do that one!