Does Anyone Know What A Stock LBZ is Dyno'd At? I know that it says 360 Hp But I want to know what it is at the rear wheels.Thanks

drop about 20 percent. 280 ish sounds familiar

All right Thanks for the info!!:)

there was a report on the 6.0L and the d-max in diesel power mag. in thier report the d-max put down a touch over 300 and the stroke a touch over 250 stock for stock.

there was a report on the 6.0L and the d-max in diesel power mag. in thier report the d-max put down a touch over 300 and the stroke a touch over 250 stock for stock.



Did they dyno a cummins in that test?

326 hp is what my buddys stock lbz dyno at. On the second pull he took the black 6.6 plastic thing on the top of the motor off and gained one horse out of it.

You can see what mine did in my sig. I also have seen one in person that did 310 at the rear wheels.

guess the 20 percent rule of thumb I was told might be a little off.

Mine stock was about 315ish...

A little offtopic but would the parasitic loss change if you were in 4HI?

319 HP @Atlanta Chassis Dyno 40k miles,stock exaust,stock airbox,stock airfilter.

Did they dyno a cummins in that test?


no

I've seen dynos of a stock LBZ of 310-320 hp. You generally see a 10-12% loss of hp to the wheels.