COUPLE QUESTIONS ON BOOST GAUGES & EXHAUST GAUGES :
HOW TO INSTALL A BOOST GAUGE , WHERE TO HOOK IT UP ??
EXHAUST TEMP GAUGE , IN THE MNIFOLD OR AFTER THE TURBO??
IVE HERD GUYS SAY THE PROBES BREAK OFF AND GO IN THE TURBO ??
ALSO ON THE LLY MOTOR , DO YOU HAVE TO REMOVE THE TURBO TO INSTALL THE GAUGE PROBE ????? ALSO A PILLAR MOUNTS , TAN TO MATCH THE INTERIOR ???????
ANY INPUT WOULD BE GREAT !!

THE05HD ):h

Look for the HOOT method to install the exhaust gauge and there are a few other threads on the BOOST gauge. You will have to decide what will work best for you and your needs... Good luck

And as far as a tan colored pillar, to my knowledge (and I"m about to buy some gauges) they all come in black and you have to paint them to match.here's the paint (http://www.dieselperformanceparts.com/cgi-bin/search.pl/dieselshop?f_success=dieselshop2&e_unique=SP985) You'll also have to get some plastic primer too from there or somewhere else. Good luck with it.

Look for the HOOT method to install the exhaust gauge and there are a few other threads on the BOOST gauge. You will have to decide what will work best for you and your needs... Good luck where is the hoot method ???? i mean do you know where i can find it !!!!!!!!!!!!!!! :ro)

also , which gauges to buy ????? brand ...... let me know !! the05hd

here (http://www.bmdmax.com/Gauges.html.0.html) BDmax made a step bye step instruction sheet for gauge installation. Obvioulsy your setup will be different since you'll be using a a-pillar mount but scroll through all that and you'll see how the sendrs are mounted.

As far as what companies, autometer, isspro, and diprocol all seem to have good reputations around here. I'm leaning toward the isspro's myself because i may get a third gauge and they've got a lot more choices than diprocol. I choose not to get autometers just because I don't like following the pack and having what everyone else has. Although, sometimes that isn't so wise...

Here is the Hoot method.

http://dieselplace.com/forum/showthread.php?t=892

get some coffee and use the search feature, all your questions have been asked several times over and have lots of good input already to absorb. Good luck

What he said

or you could go to www.kennedydiesel.com and look under tech tips. he has several tips on there.

as for the wiring of the lights to the dimmer switch, it will be the violet/white wire in the harness behind the light switch. that way you lights will work with the other guages.