Add me to the list of people who need the Cognito Pitman Idler Arm Support kit. Looks like I need to save up a bit of extra cash.

Took my truck in to get an alignment, cause I got some new tires and went up a few turns on the T-bars. So I thought I would be safe and just get it aligned. After they were all done they told me there was something loose in the front end, but that did not try to find out what it was.
My truck is still under warranty, so it went to the dealer today. They called this afternoon and said that the found some play in the Idler arm and that they were ordering a new one.

So like I said looks like I will be saving up for Support kit.( Was going to get one anyways) :D

Sorry about the long story, just had to vent.:rolleyes:

Hey man hows it going? When buy your kit you can buy one for me to if you want. LOL

Where is the best place to get this kit at??

you can either order it straight from Cognito's website, or you can get it from Nor-Cal Nick, who is a member here.

www.cognitomotorsports.com
www.norcaltruck.com

Hey man hows it going? When buy your kit you can buy one for me to if you want. LOL


I'll take one too. What the heck go ahead and buy ME a set of the Cognito tie rods as well. You deserve it. haha

Mike

FREE shipping on my site and sold cheaper than MSRP:)

Link>> http://www.norcaltruck.com/shop/index.php?cPath=2_293

FREE shipping on my site and sold cheaper than MSRP:)

Link>> http://www.norcaltruck.com/shop/index.php?cPath=2_293

I see you have the Tie rods to. Which is better, sleeves or the aftermarket tie rods?

I see you have the Tie rods to. Which is better, sleeves or the aftermarket tie rods?


Sleeves solve the weak center rod section.

HD tie rods give you over all strength.

Comes down to budget and what you are overall after making stronger.

http://www.norcaltruck.com/shop/images/CogHDTieRod.JPG

Sleeves solve the weak center rod section.

HD tie rods give you over all strength.

Comes down to budget and what you are overall after making stronger.

http://www.norcaltruck.com/shop/images/CogHDTieRod.JPG

Thanks..

So your pretty much money ahead to get the whole new tie rods right???

Thanks..

So your pretty much money ahead to get the whole new tie rods right???


Yeap...

Dang Nick.... all this time and I just realized you were in the hood.... and I never stopped by...
I was in Monterey for the week (remember Im from Virginia) visiting my Son and it wasn't until the last day I realized you were "close" by.
I wanted to stop by and talk to you and get a workup for my 07.5 extended Cab/standard box 4x4...
Hopefully if I can get back out there in the next 2 months I will get the opportunity to drive by and say howdy and make an order...

Take Care
Dan

"Hood" ... We are about 45min east of Oakland :lol:

Livermore has way more trucks than the hood. You see horses and cows in these parts.:D


Yea if you get back out here we are open Mon-Thur...8am-6pm ... Fri. 8am-5:59pm;)

Hey man hows it going? When buy your kit you can buy one for me to if you want. LOL

I'll take one too. What the heck go ahead and buy ME a set of the Cognito tie rods as well. You deserve it. haha

Mike

Yeah I'll just dig up the money I have buried in the yard.:rolleyes::D And yes Nick you were the first one I thought of when they told me they were going to replace it. I am sure I will be ordering ONE soon.;)