darkhorseonefour
03-22-2005, 12:25 PM
Is there a trick to unpluging the two fuel filter wires Need help.
|
Cobra#3747 03-22-2005, 12:31 PM The smaller one going to the water sensor has a push down clip, the other round one is a tab over type that needs to be slightly pryed up on. Careful on the round one, its easy to pull the wires out if the clip isnt released. dexter 03-23-2005, 10:27 AM I don't know if you are trying to do the same thing as me the first time I changed the filter on my D-Max but I was trying to pull the wires loose right at the filter. It took me a bit but finally realized that the pigtail is about 6 inches long coming out of the sensor before there is the connector to unplug the WIF. The connector is hidden by a clip that holds the wires to the motor. AYR TIME 03-23-2005, 02:34 PM Check out the "Fuel Filter replacment pics/instructions" under " Do It Yourself & Useful Articles" http://www.dieselplace.com/forum/showthread.php?t=1508 Eric did a great job complete with photos. Thanks again Eric Richard | ||