|
: 1996 6.5 Excessive Inside tire wear Mythos13 11-13-2008, 12:59 PM I purchased a 1996 Chevy K2500 Ext Cab , long bed and just replaced the pitman, idler, shocks, upper & lower ball joints, axles, and shocks and had it aligned and put new tires on, but am still getting a lot of tire wear on the inside. It looks as though theres a lot of negative camber on it from the front. Torsion bars were cranked up by the tire/alignment place. Please advise. Thanks J.D, US Coast Guard bikerboy-36 11-13-2008, 01:51 PM Uncrank your torsion bars or get Cognit Upper Controll Arms Dieseldad97 11-13-2008, 02:08 PM I would find another tire shop and get them to properly set the camber. I had issues once with a shop that couldn't figure out what my steering wheel wasn't straight? They experimented on my truck 3 different times. I got fed up with their incompetent workers and brought it to another shop. They laughed and fixed the truck first try. Get a second opinion. Good luck. | ||