i installed 880 in my fogs... silconed them in place and used 1 or 2 peices of ductape on each to make sure i have a good seal..
problem is when i remot start my truck one side of my fogs flickers and wont go on... to get that side fog light on i have to get in my truck and put the lights on..

i also have the 4on mod..

You're trying to pull too much Current through the Factory Harness to be able to Fire both Ballasts at the same time. Throw a Relay Harness in there and you'll be good.

You're trying to pull too much Current through the Factory Harness to be able to Fire both Ballasts at the same time. Throw a Relay Harness in there and you'll be good.



Mad Maxx do you buy chance have a wiring diagram that i could see to make this harness... i've got a buddy with a 03 that is doing that.... thanks

can you please describe in a little more detail what i need to do... im a complete eletrical tard..

Mad Maxx do you buy chance have a wiring diagram that i could see to make this harness... i've got a buddy with a 03 that is doing that.... thanks

Sorry I don't have a Wiring Diagram for ya. I just buy pre-made Harnesses and use them.

If you want to go the pre-made route, just go on Ebay, and search whatever Bulb Size you need...example "9005 HID Harness" or "9006 HID Harness"

can you please describe in a little more detail what i need to do... im a complete eletrical tard..

There are no Harnesses out for the NBS Trucks that I know of right now, because the GM Only Bulb is too new, and I don't think the Aftermarket has made anything yet. The only thing I know is that Putco makes Halogen replacement Bulbs now.