|
mydeuce 03-19-2005, 11:52 AM got a 2004 slt dually, 5.9 diesel, looking for ANY help with boost, tranny temp and pyrometer gauge installation. ISSPRO has nice gauges but extremely vauge instaructions. also, does anyone make a service manual for 2004's yet??? Blue600 03-20-2005, 08:50 AM You can see sensor locations and gauges in my pics. mydeuce 03-20-2005, 08:19 PM these gause pics are worh a thousand words. now it's time to go to work on this install. thanx much Blue600 03-21-2005, 08:16 AM Took about 5 hours to install everything. mydeuce 04-24-2005, 04:40 PM Blue600, I have but one question. On the pic you sent for the boost gauge conection, do you get a true boost reading with it being connected on the intake manifold? I am getting mixed answers. Some say that it should be on the turbo side? The intake install looks a whole lot easier. Is that the best way to go? Blue600 04-26-2005, 08:14 AM Yes you get a true reading. I can spike 34psi then it will settle to 30psi with my foot still in it, stock truck. I've seen many installs the same as mine. As far as being on the intake side, using a boost bolt as many do is also on the intake side. Drilling and tapping this location is very easy. nickleinonen 04-27-2005, 06:32 PM also, does anyone make a service manual for 2004's yet??? if you don't mine the downloading, you can go here (http://www.hemitruckclub.com/04manual/) and download the entire 2004 manual... it is is the same as the 9.99 copy i got off ebay a while back | ||