I Just Got Super Diesel's Chiller Kit And Need To Know Where The Best Place To Mount The Pump :d

I Just Got Super Diesel's Chiller Kit And Need To Know Where The Best Place To Mount The Pump :d
Behind turbo #2?:D

penut:
i mounted mine of the drivers side hood support braket with some twist ties, so far it looks to be a good locationhttp://pic3.picturetrail.com/VOL22/566829/847939/87967599.jpg

I FOUND THAT PIC LAST NIGHT IN ONE OF YOUR POSTS FRED. ITS A DONE DEAL:ro)

That's perfect fredw.

I have a kit on order (www.enginerunup.com (http://www.enginerunup.com/)). Are you going to install a separate tank or just tap into the washer fluid tank?

not to take it off track here, but could you enlighten me about why to run it?

I have a kit on order (www.enginerunup.com (http://www.enginerunup.com/)). Are you going to install a separate tank or just tap into the washer fluid tank?
NO NEED TO TAP THE TANK(I THINK). LOOK JUST INSIDE THE RIGHT FENDER IN THE SPACE BETWEEN THE FENDER AND THE BIG BLACK ELEC FUSE CENTER UNDER THE HOOD. YOU WILL FIND A SPLICE IN THE WIPER WASHER LINE. UNDO THE SPLICE AND SLIP THE WATER METH SUPPLY LINE OVER IT. SD'S PUMP SEEMS TO HAVE ENOUGH FLOW THOUGH THE OEM PUMP THAT IS IN THE BOTTOM OF THE WASHER TANK.

AS I STATED ABOVE "I THINK" IT WILL WORK I HAVE MINE SET UP THAT WAY AND AM GOING TO THE TRACK TOMARROW TO FIND OUT :ro)

Peanutgrwr or Fredw- Do you happen to have a pic of where you installed the injector? If not, can you describe where?

Im Running A Super Diesel Injection Manifold. If You Will Search You Can Come Up With A Pic Of It. It Works Great. Its A Round Nipple So To Speak That Goes Into The First Rubber Outlet House On The Turbo Just Above The Passenger Side Valve Cover. Pm Super Diesel And He Will Give You All Of Th Details :)