|
PIMPIN619 10-30-2008, 07:59 PM So i was wondering i am about to get the ppe programmer, and i was wondering. If i run ppe on level 5 with my banks bullet on performance and a ppe boost valve will this be dangerous for the turbo. I have allready seen 27psi without the ppe programmer. what is the most my stock lb7 turbo can handle. Brad92 10-30-2008, 08:02 PM ive heard that 32 psi is the max safe level PIMPIN619 10-30-2008, 08:04 PM So do you think running those programmers stacked to the max with the ppe boost valve will push it over 32psi? Brad92 10-30-2008, 08:46 PM i dunno. don't want to give bad info. scramHD 10-30-2008, 09:30 PM You will probably see 30psi. diesel625 10-30-2008, 09:43 PM 32 is the most you want to hit. maxdout1 10-30-2008, 10:00 PM All that will happen is the compressor wheel gets hungry and eats the housing.:eek: been the done that. but I had my waste gate line pluged with a bolt:D and it was pushing 36 lbs of boost:( | ||