Fingers
03-17-2005, 11:20 AM
There will be a Finger Stick price increase effective April 1'st 2005. Sticks will go from $20/stick to $25/stick, shipping via USPost included.
|
Oilbrnr 03-17-2005, 11:25 AM OUTRAGIOUS!!! -:t Your Gouging poor LLY owners!!! Why don't you just start shortening the wires, or eliminating some? That's what GM does to save $$$. :D :lol: DuckhunterInTN 03-17-2005, 11:39 AM what about just removing the underhood light? Fingers 03-17-2005, 11:40 AM Hmmmm, sticks without wires.......now you've got me thinking....... McRat 03-17-2005, 11:52 AM Or just do an "Ebay" and ship them a poorly xeroxed instruction sheet that is a copy of a thread on a performance board about a "free mod" and a handful of resistors for $25!! Works for the LS1 guys! :D Fingers 03-17-2005, 12:16 PM Or just do an "Ebay" and ship them a poorly xeroxed instruction sheet that is a copy of a thread on a performance board about a "free mod" and a handful of resistors for $25!! Works for the LS1 guys! :D Oddly enough, I did consider selling em in "kit" form. :lol: garyk211 03-17-2005, 12:22 PM Fingers How are the back orders comming??????? Fingers 03-17-2005, 12:45 PM Orders placed up to March 2nd have been filled. I hope to have enough finished to fill the rest by Monday. NCMIC 03-17-2005, 01:22 PM it was bound to come eventually. you know the price of materials have gone up, especially copper. oh well, you still can't beat the price. Chisuzu 03-17-2005, 01:47 PM Whew! Dodged that bullet. ):h DEEZL72 03-17-2005, 04:52 PM Glad I slipped in right under the wire and saved myself a whole 5 bucks! Still can't complain considering what it does for the money.:cool2: Did you get my order OK? Didn't recieve confirmation Via email. As soon as I get it, on goes the MBRP 4" cat delete muffler delete and a blocker plate! Cant wait!:ro) Aaron AKA DEEZL72 Fingers 03-17-2005, 05:43 PM Glad I slipped in right under the wire and saved myself a whole 5 bucks! Still can't complain considering what it does for the money.:cool2: Did you get my order OK? Didn't recieve confirmation Via email. As soon as I get it, on goes the MBRP 4" cat delete muffler delete and a blocker plate! Cant wait!:ro) Aaron AKA DEEZL72 I have no record of an order from any Aaron on my email or Paypal. yamahagrizzly 03-17-2005, 06:01 PM all kidding aside. these finger sticks should cost about 40-50 bucks considering the work and effort put into them. $25 is still a exlant deal. Chisuzu 03-17-2005, 06:11 PM Agreed. Thank you Fingers for doing this for us. BTW, nice fender flares too! Where did you get all that clay? Fingers 03-17-2005, 07:47 PM Agreed. Thank you Fingers for doing this for us. BTW, nice fender flares too! Where did you get all that clay? 20 lbs of Plastilina. Great modeling clay. Online ordered from a Jersey supply house. My old stuff was a bit stiff. :) Chisuzu 03-17-2005, 08:12 PM Gonna have to try that. I've been thinking sculpting foam, but clay works! :thumb: WilliamBos 03-17-2005, 08:41 PM Hey Fingers, How long does it take you to make a Fingerstick? Thanks Will Fingers 03-18-2005, 06:41 AM Hey Fingers, How long does it take you to make a Fingerstick? Thanks Will One at a time, about 1 1/2 hours. If I batch em together it works out to about 20-30 min a unit. Less if I am having a good day and the soldering iron is behaving, but that is rare. Real time, it takes about 3 days of sessions for me to push a batch of 25 through. I can't dedicate the time in one sitting for a batch and my eyes can't take it for more than an hour or two at a time. Fingers 03-18-2005, 06:47 AM Gonna have to try that. I've been thinking sculpting foam, but clay works! :thumb: A combination of the two is ideal. Saves you a lot of clay build up. For anything that is fighting gravity, you need to either place the clay over a reenforcing structure or foam to keep it from sagging anyway. And clay is heavy. I just checked and that fender flare project used 40 lbs, not 20. Fingers 03-25-2005, 08:10 AM Bump this back to the top. Price increase goes into effect in one week. Z71 Grizzly 03-25-2005, 07:05 PM As long as you keep making them I don't mind the price since it stops egr codes for the 5" exhaust I plan on putting on it. apexr.net 03-27-2005, 10:30 AM Fingers, I sent you a paypal order but i think that the zip may be wrong. The correct zip for the order from apexr@mac.com is 85712. Please confirm. Fingers 03-27-2005, 11:47 AM fixed the zip | ||