|
brimy311 10-23-2008, 10:01 AM Last weekend I changed out my Injection pump for a new one. It was running fine, except for the p0107 code (Map/Baro). This morning it would not start, so I bleed the fuel and it started right up. At a couple of stop lights it started surging and I checked the codes and got 4 codes. P0106, P0101, and P0107 twice. Any ideas? Where should I start? Rigit1 10-23-2008, 10:32 AM Last weekend I changed out my Injection pump for a new one. It was running fine, except for the p0107 code (Map/Baro). This morning it would not start, so I bleed the fuel and it started right up. At a couple of stop lights it started surging and I checked the codes and got 4 codes. P0106, P0101, and P0107 twice. Any ideas? Where should I start? p0107=Manifold Absolute Pressure (MAP) Sensor Performance p0101=Mass Air Flow (MAF) Sensor Performance p0107=Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage Looks like you have an electrical problem with the Map sensor and a Mass air flow sensor. Did you get everything plugged back in right after changing the CP3? You might trying cleaning the MAF. | ||