cheeky
03-15-2005, 06:29 PM
Hey guys I'm thinking of throwing on a set of bfg all terrians an was wondering what I have to do to the truck to make them fit. :ro)
|
Sollly 03-15-2005, 06:37 PM I cranked up the t bars a few turns, trimmed the front air dam and zip tied the front lip of the drivers fender liner. NWDmax 03-15-2005, 06:51 PM :exactly:I cranked up the t bars a few turns, trimmed the front air dam and zip tied the front lip of the drivers fender liner. HVACDIESEL 03-15-2005, 08:15 PM Same as sollly and nwdmax:exactly: dentman4054 03-15-2005, 09:26 PM how'd that affect your ride quality? ob_1jr 03-15-2005, 09:51 PM I didn't have to crank my torsion bars, but I did trim my mudflaps and inside corner of the front airdam. I also reshaped my driver's fender liner. This is with the stock rims. I have some aftermarket on the way. More to come on this. btfarm 03-16-2005, 08:09 AM With factory alloys, up 5 rounds on T-bars and reset caster (so it doesn't wander) all cleared as is, but only about 1/2" at air dam. '05 2500HD D/A ext SB. 1500 mi no rubs yet... No off road either... haneym 03-16-2005, 09:12 AM i cranked the tbars to level out the truck as soon as i got the truck (still had stock 245s). ride quality didnt change at all. didnt do a thing when the 285s were put on and ive had them on for about a month and they havent rubbed at all. mine are knobby mud grips too. b_gable 03-16-2005, 10:14 AM I just ordered a set of 285 Revos for mine and will be putting them on the stock wheels. Should be in on Friday. | ||