Truck was running fine, drove in and parked. Would not start next day. changed pmd because of fuel solenoid coil code and code saying fuel solenoid shorted. still no start. I need pinouts and expected voltages to be found on plug to pmd and fuel solenoid so I can troubleshoot. anyone have this info readily available?

:(

Thanks, Horsefly

What code # are you getting? I looked at codes and didn't see one for "fuel solenoid shorted" unless I'm missing it.:confuzeld

Sound like your fuel solenoid itself is shorted out. If thats the case and you want to check resistance, remove the intake manifold and check resistance across the 2 posts on the FSOL which is in the middle of the high pressure lines at the back of the inj pump.
Don't continue to try and start or you will melt your PMD.

Have you looked at your LP? I did a simple fuel filter change and it wouldn't start. Cranked all day long, but no start. Pulled the LP from the 94, put it in the 95 and it popped right over. I originally thought the PMD was the cause.