Edge Evo or old school guages [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: Edge Evo or old school guages


tampaDMAX
10-08-2008, 07:24 PM
Need to get guages for my truck and was wondering if I should go with the Edge EVO or old school triple guage pod...I have the Quad for tuning so it would be for guages only. The digital led of the Evo looks pretty cool and mounts right on the dash. But old school guages also look good. The Evo also has the ability to be a programmer and possibly have better resale value huh? I just dont know. Any word from both sides of the fence would be great.

DSTRBD
10-08-2008, 07:38 PM
You should also consider the Edge Insight which is essentially the same monitor with no power options. The price is about $100 cheaper as well with the pyro probe. The Evo is a great option as well though. Let me know if I can help with anything.

tampaDMAX
10-08-2008, 08:16 PM
so the insight is the same as the evo minus the tune capability that may be the way to go.. it does come with the pyro correct does it also have the ability to mount the same on the dash as the evo

tampaDMAX
10-08-2008, 08:28 PM
also what about the attitude monitor i noticed its cheaper than the insight it also states on edges site that the attitude detects tranny slipage.. does the insight let me know which u think would be the best bet..

DSTRBD
10-08-2008, 08:34 PM
The Attitude monitor will not work as a stand alone unit, it needs the Juice to work.

The Insight does not include a pyro probe with it, but they are offered seperately. If you want the dash mount, that is extra as well. I will PM you some pricing.

tampaDMAX
10-08-2008, 08:57 PM
ok great.. do either the insight or the evo, monitor tranny slippage?

08DuramaxBoy
10-09-2008, 12:16 AM
The Attitude monitor will not work as a stand alone unit, it needs the Juice to work.

The Insight does not include a pyro probe with it, but they are offered seperately. If you want the dash mount, that is extra as well. I will PM you some pricing.

Hey Nate, send me some pricing! I am also interested in one of these;)

DSTRBD
10-09-2008, 12:32 AM
On the way....