will these tires fit under a stock truck? would i need a lift is wut i'm getting at?

thanks for the help

i was wondering the same thing. It seems like the diameter is the same as a 285/75/16 (33) which is what i am running now but i think they are wider and that may be the problem.

Sure crank the shit out of it, put a block in the back and trim like crazy theyll fit. Many guys have done it. Looks damn good to, just really gotta trim and i bet you will still rub. good luck

i put on the 285/65/18's last week and i'm still trimmin' a little more every couple of days. put 2-1/2 turns in to the bars, not sure if want got got much more - dont want the front higher than the rear:)

cut the front valance and back of the fender. the right backspacing helps a lot also, but it can be done and looks badass with those 13" wide tires

they are 13.3 inchs wide vs a 285 that are around 10 inchs wide , im planning on running a 325/60/18, t-bars cranked, im thinking it shouldnt be a problem with a bit of trimming

2004 GMC 2500HD REG CAB DURAMAX

I have them on my 05 with green keys maxed out and Cognito upper UCA's with 1" blocks out back and it rubs whenever i hit a bump or a curb.

I"ve got them on my 04, cranked 2" in the front, and 2.5" add-a-leaf in the rear. Had to do some trimming to the back of the fender/rocker area. Really, if I could do it again, i'd just get a 12.5 instead of the 13.5. But it can be done, and looks damn good.

I have them on my o8 325-60-18 nitto terra grapler even with the torsion bars cranked up they still rubs i bit and the truck rides like shit

I had keys and cranked 2.5" up front, rode like a tank but looked good IMO.
http://i33.photobucket.com/albums/d56/cluster1ne/IMG_1216.jpg