|
Stringer 12-05-2003, 06:21 PM Will 305/70R16's fit on an unlifted truck? Want the look of the big tires, but don't want to lift it. Also, is there any way to widen the rear track width without compromising towing ability? Don't like how far in the rear tires are, but don't want to make the truck unsafe for towing. Thanks. Edited by: Stringer GassedRacing 12-05-2003, 06:27 PM I was running 305/70/16 on my 98 half ton Z-71 with only a couple cranks on the torsion bars. They were the goodyear AT/S' and they gave me an easy 50K miles with no problems. I want to put the same on my new '04 D/A but it is gonna mean new rims cause the stockers are really just 16" pizza cutters. turbodiesel03 12-05-2003, 06:41 PM they fit just fine.. 2 or 3 cranks on the bars and your good to go Stringer 12-06-2003, 01:49 AM turbodiesel03, are you running the stock wheels? Also, concerning the rear track width, any suggestions? Thanks again. dutch 12-06-2003, 09:57 AM It's what mine had on it when I got it. No lift and I dont' even know if the tors bars have been turned or not. The nose is down slightly from the back which leads m to believe the tors bars have not been turned. Can I turn them myself if I wanted to raise the front a little? turbodiesel03 12-08-2003, 11:38 AM YES STOCK WHEELS..... JimWilson 12-11-2003, 10:29 PM Knowing how close to the wheel wells my 285/75's get when turning I'd personally never put on 305/70's without a lift. | ||