MTWC
03-10-2005, 09:42 PM
just thinking about switching exhuast
and wondering what i could get for my stock
and wondering what i could get for my stock
|
: how much could i get for stock duramax exhaust??? briano 03-10-2005, 09:53 PM I would hold onto the front cat pipe if I were you. Never know when a dealer trip is in the works and you may need it. TheBac 03-10-2005, 10:11 PM how much is stainless steel scrap going for a pound now? ON EDIT: just checked....T-304 scrap going for .76/lb. briano 03-10-2005, 10:25 PM that stock cat back must weigh 40 pounds or more... I know its heavy. dyindmax 03-10-2005, 11:23 PM Put a couple of Flukes on them! Stainless Steel boat anchors should bring a good buck.:muahaha: Some of these threads just crack me up max camper 03-11-2005, 11:35 AM I'd like to buy an LLY front pipe. I want to cut the ends off the cat and weld it to 4" pipe. But I can't go with out the truck while I am playing with mine. briano 03-11-2005, 11:52 AM Max, check this thread out.. its 4" and is what you need.. direct replacement. http://dieselplace.com/forum/showthread.php?t=24848&highlight=lb7 JimsGimmy 03-11-2005, 12:12 PM ??? Any problem with state inspection, I'm reg in Texas now. kodydog 03-11-2005, 01:44 PM What is the stock LLY exhaust system made from? briano 03-11-2005, 02:21 PM ??? Any problem with state inspection, I'm reg in Texas now. as far as I know..and don't quote me on this, but I read that Diesels didn't have to do the smog check in Texas. They are starting to sniff in a few local counties in September so we'll see. Mine is up in August anyways. briano 03-11-2005, 02:22 PM What is the stock LLY exhaust system made from?stainless I believe max camper 03-11-2005, 02:53 PM Max, check this thread out.. its 4" and is what you need.. direct replacement. http://dieselplace.com/forum/showthread.php?t=24848&highlight=lb7 briano, Thanks but I already have a 4" turbo back system from HOG (not installed), what I am looking for is a spare LLY pipe w/cat that I can cut and install (the cat)and make a true 4" turbo back system and keep the cat. I am just trying to get it done on the floor before the install. briano 03-11-2005, 02:57 PM briano, Thanks but I already have a 4" turbo back system from HOG (not installed), what I am looking for is a spare LLY pipe w/cat that I can cut and install (the cat)and make a true 4" turbo back system and keep the cat. I am just trying to get it done on the floor before the install. gotcha..keep the cat, but move up to 4" pipe. You might post in the wanted section for one, I am sure someone will be discarding one. hhfco 03-11-2005, 08:08 PM One on Ebay right now, at $25 but hasn't met the reserve. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7960895259&category=33630 | ||