Hey everyone,

I need help :(. I have a SPA Design 211 BOOST/EGT Gauge and I am not sure where to plug in the sensor under the hood :banghead:.

I need some pics if possible and some written guidance/suggestions. The instructions that came with the gauge aren't worth crap -:t !!!

Can some one please help?

-STEVE-

What truck do you have? Do search and you will find a TON of info and pix's.
There are other ways, But...
Here is how I did mine the first time. (LB7)
http://dieselplace.com/forum/attachment.php?attachmentid=609&stc=1

And this is how it is now installed using Super Diesels Manifold (LB7)
http://dieselplace.com/forum/attachment.php?attachmentid=2160&stc=1

Where can I get a Super Diesel Manifold (LB7) or a website to order form?

Thanks,

-STEVE-

if you would like to do a cheaper install you can just drill and tap in the metal pipe just down toward the engine from where the SD manifold goes, like a ten dollar job in total, look for the redhose, with brass fitting in the picture

whats all those other hoses ):h

:eek:

What aren't you pumping into the intercooler?

Where can I get a Super Diesel Manifold (LB7) or a website to order form?

Thanks,

-STEVE-Just shoot "Super diesel" a PM.

those other lines are extra wiring that i run along the intake tube over to the battery for accessories i tow

those other lines are extra wiring that i run along the intake tube over to the battery for accessories i tow
:exactly: Sure they are....:muahaha:

Where can I get a Super Diesel Manifold (LB7) or a website to order form?

Thanks,

-STEVE-
On the LB7 you can T off the waste gate hose to run your boost guage.