|
DurasaurusLBZ 08-19-2008, 07:59 PM Im trying to do the reroute and ive done searchs but cant find exactly what materials and sizes of materials im going to need. im assuming its just some tubing and clamps and i should be good, but wanna be sure. thanks addicted 08-19-2008, 08:13 PM Here's the easiest way http://www.dieselplace.com/forum/showthread.php?t=240415 cuminstrkmydmax 08-19-2008, 09:51 PM What exctly does the reroute accomplish? I have seen the mod listed and brought up in other spots, but i dont know what it is or does? THANKS Steven HeavyHD 08-19-2008, 10:09 PM All I used was a t that fit half inch hose, about 5ft of half inch heater hose and some hose clamps. DuraRaj 08-20-2008, 01:31 AM What exctly does the reroute accomplish? I have seen the mod listed and brought up in other spots, but i dont know what it is or does? THANKS Steven The reroute took care of the oil in my 'charger and IC lines...:) redws6rocket 08-23-2008, 11:49 AM i bought the fittings from the all burkhard and got my own clamps and hose and just routed straighted dowm from the valve cover. i had a puddle of oil my egr valve when i had it off. no egr and no pce through the motor!!! jettech 08-23-2008, 06:03 PM What exctly does the reroute accomplish? I have seen the mod listed and brought up in other spots, but i dont know what it is or does? THANKS Steven the pvc system on our trucks is a closed system( more epa crap),its vented into the intake which has a tendency to suck some oil out of the crankcase and deposit it in the intake tubes and turbo. The reroute just vents it to atmosphere instead. jettech 09-05-2008, 08:45 AM This thread got me off my a** finally, I ordered my kit from Tony yesterday. jettech 09-06-2008, 11:09 PM Got it today,2 days after ordering. Thanks for the quick service Tony. | ||