can someone please walk me through the steps on the quad step by step on how to put a 50hp tune on and the dpf delete program

this is my first programer and dont want to walk into it blindly:rolleyes:

thx:):D

sure you have the DPF delete already down loaded? If not go to the quad site(here is the link)

http://www.**************.com/

click on "product updaes"

once in there the "USB updates" section

click the "stealth 2" then find the DPF delete that matches your truck READ THE INSTRUCTIONS on the PDF file. It helps to have two windows open in the computer so you can toggle between the instructions and download page.

once down loaded and complete and you have the No DPF tunes

Go to your truck make sure your radio is off and all the A/C and dome light

(no acc. power) with the key off plug in the stealth2 and let it start up.

it will tell you when to turn the key on.

You will follow the instructions on the screen (really easy )

however the first time it could take 15 minutes or so...... it has to get your current PCM info.

once it has you to second screen "select tune" highlight it and click the "Y"

Select the 50 HP (all the tunes will be noDPF except the one stock option)

Let it load,

you will know the tune has taken or loaded correctly because the screen will count down and the last screen will read "POWER UNLEASHED"


I hope this helps I tried to be as complete as possible (from memory) Good luck and have fun!! MIkeD>

FYI stock non DPF is now one of the options

sure you have the DPF delete already down loaded? If not go to the quad site(here is the link)

http://www.**************.com/

click on "product updaes"

once in there the "USB updates" section

click the "stealth 2" then find the DPF delete that matches your truck READ THE INSTRUCTIONS on the PDF file. It helps to have two windows open in the computer so you can toggle between the instructions and download page.

once down loaded and complete and you have the No DPF tunes

Go to your truck make sure your radio is off and all the A/C and dome light

(no acc. power) with the key off plug in the stealth2 and let it start up.

it will tell you when to turn the key on.

You will follow the instructions on the screen (really easy )

however the first time it could take 15 minutes or so...... it has to get your current PCM info.

once it has you to second screen "select tune" highlight it and click the "Y"

Select the 50 HP (all the tunes will be noDPF except the one stock option)

Let it load,

you will know the tune has taken or loaded correctly because the screen will count down and the last screen will read "POWER UNLEASHED"


I hope this helps I tried to be as complete as possible (from memory) Good luck and have fun!! MIkeD>

hey thx alot:D:D

Make sure you return ithe tuner back to stock before you update it with the no dpf files