|
beau323 03-02-2005, 10:04 PM I have a Gibson exhaust and would like to get the exhaust ( tubing needed ) from turbo to muffler. I have looked, but can not find anything but full exhaust packages or just the downpipe. Anyone know where I can get the parts I need. This is a 2005 D/A, crew cab, long bed, 4x4.Thank you.:help: dwrat 03-02-2005, 11:33 PM I think what you are looking for is what some people call the down pipe. It is the part where the cat is located. beau323 03-03-2005, 12:28 AM Yes, I know, but I also need another pipe from there to muffler. I can't find that next pipe from downpipe to muffler. Do you know where I can find it. Thanks for the response. Also, can I use, or even get 4" all the way? haneym 03-03-2005, 10:30 AM not sure if its a straight piece of pipe or has to be bent to fit, but i have 2 suggestions. NAPA sells exhaust pipe, i have just gone in and told them i need X inches of X diameter pipe and they cut it and give it to me. or go to a custom exhaust shop and have them cut and bend the pipe. since its only the one pipe, it shouldnt cost too much, esp if you install it yourself instead of them. BK Tool 03-03-2005, 10:37 AM I have a Gibson exhaust and would like to get the exhaust ( tubing needed ) from turbo to muffler. I have looked, but can not find anything but full exhaust packages or just the downpipe. Anyone know where I can get the parts I need. This is a 2005 D/A, crew cab, long bed, 4x4.Thank you.:help:If the Gibson was a cat back system that bolts to the stock 4 bolt flange on your cat, then you can order a down pipe and it will bolt right up to the Gibson system. Look here for a great write up. http://dieselplace.com/forum/showthread.php?t=24848 beau323 03-03-2005, 11:19 AM Thank you for the suggestions. It does not actually go all the way to the 4bolt flange, so I think I will try the custom route and order a downpipe somewhere. Thanks BK Tool 03-03-2005, 11:25 AM Thank you for the suggestions. It does not actually go all the way to the 4bolt flange, so I think I will try the custom route and order a downpipe somewhere. ThanksThen how is the Gibson connected to the cat now? Did they cut the flange off the cat? If so that seems kind of hacked. beau323 03-03-2005, 07:04 PM BK Tool, The Gibson starts at the muffler. It did not come with an extension pipe, so it is installed right at the muffler, then back. Everything in front of muffler is still stock, from muffler to front pipe. Thanks | ||